# Imports that finish in the background

> **Short answer:** A long list imports in the background, and so does a Manager’s or an Admin’s file that marks people unsubscribed, bounced or spam. The screen says Your list is importing, you can close the tab, and Jounce emails you when it’s done.

A short list finishes while you watch. A list of several hundred rows or more
imports in the background instead. In the background, Jounce checks and adds
the people on its own, so you're free to leave.

A file of any length that marks people unsubscribed, bounced or spam imports
in the background too, when a Manager or an Admin imports it. That's where
Jounce keeps those opt-outs.

## What you see

After **Import contacts**, the screen says _Your list is importing_. Below
that: _Jounce is adding your 1,200 contacts to “Jun 26 import” in
the background._ It names every segment this import lands in, starting with the
dated one. Under it: _Close this tab whenever you like — Jounce emails you the
moment it's done._

**Back to contacts** takes you to the list. People show up there as Jounce adds
them. A list this size is usually done in minutes.

Started from the send screen, the button reads **Back to recipients**. It takes
you back to the email you were sending, with the import's segment already
picked. **Continue** waits there until the import is done. Either way,
**Back** at the top left, or Esc, does the same as the button.

Haven't verified your email address yet? Jounce asks you to before an import
starts in the background, since that's where the email goes.
[Why won't my file import?](https://help.jounce.com/contacts/import-from-a-csv/why-wont-my-file-import)
walks through it.

## The email

When the import finishes, Jounce emails whoever started it, at the address
they sign in with. If a teammate started it, the workspace owner gets a copy
too. The subject matches the outcome:

| Subject                     | When                                                                    |
| --------------------------- | ----------------------------------------------------------------------- |
| _Your contacts are in_      | At least one person was added.                                          |
| _Your list is up to date_   | Nobody was new, but people you already had were updated.                |
| _Your import finished_      | Nothing was added or updated.                                           |
| _Your import didn't finish_ | It stopped partway. See below.                                          |
| _Your import didn't start_  | It never got going, or your workspace has too many contacts. See below. |

If anything couldn't be saved, the subject is _Your import finished_, even
when people were added or updated.

The first line counts who joined and names each segment this import put them in. For
example: _1,200 new contacts joined “Jun 26 import” and “VIP”._ Everyone the
import took in is in all of them. Then it lists how many were already on your
list, and how many you had deleted are back on it.

Why does a deleted person come back? See
[When an email already exists](https://help.jounce.com/contacts/import-from-a-csv/when-an-email-already-exists).

Say a Manager or an Admin imports a file that marks people unsubscribed,
bounced or spam. A line then counts each status Jounce gave someone on your
list. For example: _24 on your list — now unsubscribed, as your file says_.
The others read _now marked as bounced_ and _now marked as spam_.

A line such as _2 rows repeated an email address — each address counts once_
means your file listed some addresses on more than one row. Then it lists how
many were _rejected_, one line for each reason. Anything Jounce couldn't save
comes last.

After a file like that, a note under the lines says what Jounce kept. It reads
_Jounce keeps everyone your file marks unsubscribed, bounced or spam on your
suppression list, so a later import can't add them back._

**See who's in** opens your Segments page.

> **Note** The email counts the rows rejected for each reason. It doesn't list
> the addresses. For a background import, there is no rejected-rows file to
> download.
> [Why were some rows rejected?](https://help.jounce.com/contacts/import-from-a-csv/why-were-some-rows-rejected)
> explains each reason.

To see who was left out, open **Contacts**. Pick the import's segment under
**Segment**, then compare the list with your file. A reason that ends _in
your file_ comes from your file's Status column, or a Mailchimp file's
UNSUB_TIME or CLEAN_TIME column, so that column shows which rows they are.

## The note in Jounce

While the tab you started from stays open, Jounce also says when the import
is done, wherever you are in Jounce. A note at the bottom of the screen gives
the email's heading and first line. For example: _Your contacts are in. 1,200
new contacts joined “Jun 26 import” and “VIP”_.

The note's button is the email's, such as **See who's in**. The email comes
either way. If you reload the page or sign out first, or you're in another
workspace when it finishes, only the email tells you.

## If something couldn't be saved

_Couldn't be added_ counts people new to your list who weren't added. Import the
same file again. Under **When an email already exists**, choose **Skip them**.
The missing people are added, and everyone already on your list stays as they are.
Choosing **Update their details and keep their history** instead would also
bring back anyone in the file you've deleted.

_Couldn't be updated_ counts people you already had. They stay as they were, so
there's nothing you need to do. To bring your file's changes to them anyway,
import it again and choose **Update their details and keep their history**. It
also brings back anyone in the file you've deleted.

Got both lines? One import with **Skip them** is all you need.

_Couldn't be read_ counts rows in your file that Jounce couldn't use. Importing
it again won't change that, so select _contact us_ on that line.

_Jounce couldn't put 3 of them on your suppression list. Import the same file
again to finish._ means some people your file opts out aren't kept yet. Import
the same file again and choose **Skip them**. Jounce keeps the ones it missed,
and nobody is added twice.

## If it stops partway

When Jounce can't finish an import, it sends you an email headed _Your import
didn't finish_. Everyone it saved before it stopped is on your list. If the
tab you started it from is still open, a note there says so too, and names
the choice to make.

To finish, import the same file again, unless the email says
[your workspace has too many contacts](#if-your-workspace-has-too-many-contacts).
Under **When an email already exists**, make the same choice as the first time;
the email names that choice. Nobody is added twice. **Update their details and
keep their history** also brings back anyone in the file you've deleted since.

On the **Segment** step, Jounce fills in a name with today's date. If you're importing again on a later day, that name would start a second segment, so clear it. Then, under
**Segments you already have**, pick each segment the email names. For example,
_Jun 26 import_ and _VIP_.

## If it never starts

Rarely, Jounce can't get an import going at all. Then it emails you a few hours
later, headed _Your import didn't start_. That import changed nothing on your
list. Import the same file again, the same way as above. If you've already
imported that file again, Jounce skips this email.

## If your workspace has too many contacts

As an import begins, Jounce checks how many contacts your workspace would end
up with. If that's too many, Jounce stops before adding anyone and emails you,
headed _Your import didn't start_. The email says your workspace has too many
contacts already. This import changed nothing on your list.

Rarely, the email is headed _Your import didn't finish_ instead, and everyone
Jounce saved before it stopped is on your list.

Either way, importing the same file again won't help. To ask for more room,
select _contact us_ in the email.
[Why won't my file import?](https://help.jounce.com/contacts/import-from-a-csv/why-wont-my-file-import)
says which contacts count.

## If no email comes

Import emails share the limits on confirmation emails, the ones that ask new
contacts to confirm. Your workspace has a daily limit on them, and after a
sending problem Jounce can pause them for everyone who uses Jounce.

When a limit is full or a pause is on, Jounce skips the import email and doesn't
send it later. The import still finishes, so check your list under **Contacts**.

The workspace owner's copy goes out only once the owner has verified their
email address. Jounce also skips the email for anyone whose address bounced
one of its emails. It skips anyone who marked a signup email, an import email,
a daily-limit email or the _Sending is paused_ email as spam, too.

No email, and your list has stopped growing?
[Ask a person at Jounce](https://help.jounce.com/start-here/getting-around/get-help-from-a-person-at-jounce).

## Also answered here

- “can I close the tab during import”
- “how long does an import take”
- “how do I know when my import is done”

---

Updated 2026-11-10 · https://help.jounce.com/contacts/import-from-a-csv/imports-that-finish-in-the-background
